MANN-FILTER W 940/25 vs K&N HP-3001: Oil Filter Compatibility
Compare MANN-FILTER W 940/25 and K&N HP-3001 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
MANN-FILTER W 940/25 and K&N HP-3001 specifications
How matching is scored| Specification | MANN-FILTER W 940/25 | K&N HP-3001 |
|---|---|---|
| Thread size | 3/4-16 | 3/4-16 |
| Gasket OD | 71.5 mm | 71 mm |
| Gasket ID | 62.5 mm | 62 mm |
| Can OD | 93.47 mm | 97 mm |
| Height | 131.52 mm | 138 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 30 | 11 - 17 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.5 mm (MANN-FILTER W 940/25: 71.5 mm, K&N HP-3001: 71 mm).
Gasket ID differs by 0.5 mm (MANN-FILTER W 940/25: 62.5 mm, K&N HP-3001: 62 mm).
K&N HP-3001 is 6.5 mm taller (MANN-FILTER W 940/25: 131.52 mm, K&N HP-3001: 138 mm) -- check clearance before substituting.
Can OD differs by 3.5 mm (MANN-FILTER W 940/25: 93.47 mm, K&N HP-3001: 97 mm).
Both open their bypass valve in a comparable range: MANN-FILTER W 940/25 at 30-30 psi, K&N HP-3001 at 11-17 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.