Baldwin B114 vs Baldwin B2-HPG: Oil Filter Compatibility
Compare Baldwin B114 and Baldwin B2-HPG oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Large bypass PSI mismatch: 22 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B114 and Baldwin B2-HPG specifications
How matching is scored| Specification | Baldwin B114 | Baldwin B2-HPG |
|---|---|---|
| Thread size | 3/4-16 | 3/4-16 |
| Gasket OD | 71.4 mm | 71.4 mm |
| Gasket ID | 62.7 mm | 62.7 mm |
| Can OD | 95.3 mm | 93.7 mm |
| Height | 134.1 mm | 137.3 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 30 | 8 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD is identical at 71.4 mm.
Gasket ID is identical at 62.7 mm.
Baldwin B2-HPG is 3.2 mm taller (Baldwin B114: 134.1 mm, Baldwin B2-HPG: 137.3 mm) -- check clearance before substituting.
Can OD differs by 1.6 mm (Baldwin B114: 95.3 mm, Baldwin B2-HPG: 93.7 mm).
Both open their bypass valve in a comparable range: Baldwin B114 at 30-30 psi, Baldwin B2-HPG at 8-8 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.