WIX 51381 vs MAHLE OC 581: Oil Filter Compatibility
Compare WIX 51381 and MAHLE OC 581 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
WIX 51381 and MAHLE OC 581 specifications
How matching is scored| Specification | WIX 51381 | MAHLE OC 581 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 71.98 mm | 71 mm |
| Gasket ID | 62.53 mm | 62.5 mm |
| Can OD | 92.99 mm | 80 mm |
| Height | 80 mm | 100 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 - 15 | 14 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 1 mm (WIX 51381: 71.98 mm, MAHLE OC 581: 71 mm).
Gasket ID is identical at 62.53 mm.
MAHLE OC 581 is 20 mm taller (WIX 51381: 80 mm, MAHLE OC 581: 100 mm) -- check clearance before substituting.
Can OD differs by 13 mm (WIX 51381: 92.99 mm, MAHLE OC 581: 80 mm).
Both open their bypass valve in a comparable range: WIX 51381 at 12-15 psi, MAHLE OC 581 at 14-14 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.