NAPA Gold 1372 vs LUBER-FINER PH820: Oil Filter Compatibility
Compare NAPA Gold 1372 and LUBER-FINER PH820 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M22x1.5 thread.
Quick verdict
Closest known dimensional difference: height +3.7 mm. Verify application-specific requirements before substituting.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
NAPA Gold 1372 and LUBER-FINER PH820 specifications
How matching is scored| Specification | NAPA Gold 1372 | LUBER-FINER PH820 |
|---|---|---|
| Thread size | M22x1.5 | M22x1.5 |
| Gasket OD | 70 mm | 71 mm |
| Gasket ID | 60 mm | 62 mm |
| Can OD | 93.17 mm | 93 mm |
| Height | 97.43 mm | 101.09 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 13 - 19 | 22 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M22x1.5.
Gasket OD differs by 1 mm (NAPA Gold 1372: 70 mm, LUBER-FINER PH820: 71 mm).
Gasket ID differs by 2 mm (NAPA Gold 1372: 60 mm, LUBER-FINER PH820: 62 mm).
LUBER-FINER PH820 is 3.7 mm taller (NAPA Gold 1372: 97.43 mm, LUBER-FINER PH820: 101.09 mm) -- check clearance before substituting.
Can OD differs by 0.2 mm (NAPA Gold 1372: 93.17 mm, LUBER-FINER PH820: 93 mm).
Both open their bypass valve in a comparable range: NAPA Gold 1372 at 13-19 psi, LUBER-FINER PH820 at 22-22 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.