Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A vs WIX WL10412: Oil Filter Compatibility
Compare Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A and WIX WL10412 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M22x1.5 thread.
Quick verdict
Closest known dimensional difference: height -17.7 mm. Verify application-specific requirements before substituting.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A and WIX WL10412 specifications
How matching is scored| Specification | Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A | WIX WL10412 |
|---|---|---|
| Thread size | M22x1.5 | M22x1.5 |
| Gasket OD | 71 mm | 70.1 mm |
| Gasket ID | 62 mm | 60.96 mm |
| Can OD | 95.76 mm | 75.7 mm |
| Height | 123.7 mm | 106 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 - 16 | 14 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M22x1.5.
Gasket OD differs by 0.9 mm (Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A: 71 mm, WIX WL10412: 70.1 mm).
Gasket ID differs by 1 mm (Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A: 62 mm, WIX WL10412: 60.96 mm).
Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A is 17.7 mm taller (Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A: 123.7 mm, WIX WL10412: 106 mm) -- check clearance before substituting.
Can OD differs by 20.1 mm (Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A: 95.76 mm, WIX WL10412: 75.7 mm).
Both open their bypass valve in a comparable range: Mobil 1 (ExxonMobil / Mann+Hummel) M1-210A at 8-16 psi, WIX WL10412 at 14-14 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.