MAHLE OC 581 vs FRAM PH5458: Oil Filter Compatibility
Compare MAHLE OC 581 and FRAM PH5458 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
MAHLE OC 581 and FRAM PH5458 specifications
How matching is scored| Specification | MAHLE OC 581 | FRAM PH5458 |
|---|---|---|
| Thread size | M20x1.5 | M20X1,5 |
| Gasket OD | 71 mm | 71 mm |
| Gasket ID | 62.5 mm | 61 mm |
| Can OD | 80 mm | 68 mm |
| Height | 100 mm | 100 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 71 mm.
Gasket ID differs by 1.5 mm (MAHLE OC 581: 62.5 mm, FRAM PH5458: 61 mm).
Height is identical at 100 mm.
Can OD differs by 12 mm (MAHLE OC 581: 80 mm, FRAM PH5458: 68 mm).
Both open their bypass valve in a comparable range: MAHLE OC 581 at 14-14 psi, FRAM PH5458 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.