FRAM PH5752 vs CNH Industrial (Case IH) 1275229C1: Oil Filter Compatibility

Compare FRAM PH5752 and CNH Industrial (Case IH) 1275229C1 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.

Quick verdict

RISKY

Both use a M20x1.5 thread.

  • Thread size is the first hard-fit check for any comparison of spin-on filters.
  • Gasket OD and gasket ID are the most important seal-related dimensions.
  • Height differences can matter for clearance even when thread and gasket fit appear close.
  • Bypass and anti-drainback differences may be important, depending on the application.

FRAM PH5752 and CNH Industrial (Case IH) 1275229C1 specifications

How matching is scored
Specification
FRAM PH5752
CNH Industrial (Case IH) 1275229C1
Thread sizeM20X1,5M20x1.5
Gasket OD72 mm71.4 mm
Gasket ID62 mm62.7 mm
Can OD76 mm68.25 mm
Height70 mm85.73 mm
Internal bypass valveYesYes
Bypass PSID14.50411 - 14
Anti-drainback valveYesYes

What matters in this specific comparison

Thread size matches: both are M20x1.5.

Gasket OD differs by 0.6 mm (FRAM PH5752: 72 mm, CNH Industrial (Case IH) 1275229C1: 71.4 mm).

Gasket ID differs by 0.7 mm (FRAM PH5752: 62 mm, CNH Industrial (Case IH) 1275229C1: 62.7 mm).

CNH Industrial (Case IH) 1275229C1 is 15.7 mm taller (FRAM PH5752: 70 mm, CNH Industrial (Case IH) 1275229C1: 85.73 mm) -- check clearance before substituting.

Can OD differs by 7.8 mm (FRAM PH5752: 76 mm, CNH Industrial (Case IH) 1275229C1: 68.25 mm).

Both open their bypass valve in a comparable range: FRAM PH5752 at 14.504-14.504 psi, CNH Industrial (Case IH) 1275229C1 at 11-14 psi -- these ranges do not overlap.

Open related filters

Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.