FRAM PH4701 vs Champ PH3980: Oil Filter Compatibility
Compare FRAM PH4701 and Champ PH3980 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee.
Quick verdict
Large gasket OD variation · Large gasket ID variation
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH4701 and Champ PH3980 specifications
| Specification | FRAM PH4701 | Champ PH3980 |
|---|---|---|
| Thread size | M18X1,5 | M18x1.5 |
| Gasket OD | 72 mm | 70.1 mm |
| Gasket ID | 62 mm | 62.5 mm |
| Can OD | 76 mm | 77.47 mm |
| Height | 120 mm | 116.08 mm |
| Internal bypass valve | Yes | No |
| Bypass PSID | 12 | Unknown |
| Anti-drainback valve | Yes | Yes |
What matters most in this comparison?
Thread match: A direct spin-on substitute starts with the same thread size. If the threads differ, the comparison stops there.
Gasket fit: Even when thread size matches, the gasket outside diameter and inside diameter still control whether the filter seals safely against the mounting surface.
Height difference: Small height differences may be acceptable, but longer filters can create clearance problems in tighter installations.
Valve behavior: Bypass and anti-drainback differences can matter in real-world service, especially on cold start or in applications sensitive to oil drain-back.
Related filter pages
- FRAM PH4701 oil filter cross reference
- Champ PH3980 oil filter cross reference
- WIX 51036 oil filter cross reference
- WIX 51036MP oil filter cross reference
- NAPA Gold 1190 oil filter cross reference
- WIX 51190 oil filter cross reference
- FRAM PH3980 oil filter cross reference
- Fleetguard LF3554 oil filter cross reference
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.