FRAM PH3569 vs WIX 51647: Oil Filter Compatibility
Compare FRAM PH3569 and WIX 51647 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee.
Quick verdict
These filters may still be worth comparing, but thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements should be reviewed before substitution.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH3569 and WIX 51647 specifications
| Specification | FRAM PH3569 | WIX 51647 |
|---|---|---|
| Thread size | 3/4"-16 | 3/4-16 |
| Gasket OD | 71 mm | 71.98 mm |
| Gasket ID | 61 mm | 62.53 mm |
| Can OD | 93.73 mm | 92.96 mm |
| Height | 136.65 mm | 131.5 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 12 - 15 |
| Anti-drainback valve | Yes | Yes |
What matters most in this comparison?
Thread match: A direct spin-on substitute starts with the same thread size. If the threads differ, the comparison stops there.
Gasket fit: Even when thread size matches, the gasket outside diameter and inside diameter still control whether the filter seals safely against the mounting surface.
Height difference: Small height differences may be acceptable, but longer filters can create clearance problems in tighter installations.
Valve behavior: Bypass and anti-drainback differences can matter in real-world service, especially on cold start or in applications sensitive to oil drain-back.
Related filter pages
- FRAM PH3569 oil filter cross reference
- WIX 51647 oil filter cross reference
- Donaldson P550008 oil filter cross reference
- Donaldson P557780 oil filter cross reference
- FRAM PH46 oil filter cross reference
- K&N HP-3001 oil filter cross reference
- WIX 51806 oil filter cross reference
- Baldwin B336 oil filter cross reference
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.