FRAM PH3569 vs Baldwin B114: Oil Filter Compatibility
Compare FRAM PH3569 and Baldwin B114 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH3569 and Baldwin B114 specifications
How matching is scored| Specification | FRAM PH3569 | Baldwin B114 |
|---|---|---|
| Thread size | 3/4"-16 | 3/4-16 |
| Gasket OD | 71 mm | 71.4 mm |
| Gasket ID | 63 mm | 62.7 mm |
| Can OD | 93 mm | 95.3 mm |
| Height | 140 mm | 134.1 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 31.908 | 30 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.4 mm (FRAM PH3569: 71 mm, Baldwin B114: 71.4 mm).
Gasket ID differs by 0.3 mm (FRAM PH3569: 63 mm, Baldwin B114: 62.7 mm).
FRAM PH3569 is 5.9 mm taller (FRAM PH3569: 140 mm, Baldwin B114: 134.1 mm) -- check clearance before substituting.
Can OD differs by 2.3 mm (FRAM PH3569: 93 mm, Baldwin B114: 95.3 mm).
Both open their bypass valve in a comparable range: FRAM PH3569 at 31.908-31.908 psi, Baldwin B114 at 30-30 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.