FRAM PH2842 vs Fleetguard LF17488: Oil Filter Compatibility
Compare FRAM PH2842 and Fleetguard LF17488 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 1-12 thread.
Quick verdict
Large bypass PSI mismatch: 24.3 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH2842 and Fleetguard LF17488 specifications
How matching is scored| Specification | FRAM PH2842 | Fleetguard LF17488 |
|---|---|---|
| Thread size | 1"-12UNF | 1-12 UNF-2B |
| Gasket OD | 71 mm | 71.5 mm |
| Gasket ID | 62 mm | 61.5 mm |
| Can OD | 76 mm | 79 mm |
| Height | 123 mm | 123 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 36.26 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 1-12.
Gasket OD differs by 0.5 mm (FRAM PH2842: 71 mm, Fleetguard LF17488: 71.5 mm).
Gasket ID differs by 0.5 mm (FRAM PH2842: 62 mm, Fleetguard LF17488: 61.5 mm).
Height is identical at 123 mm.
Can OD differs by 3 mm (FRAM PH2842: 76 mm, Fleetguard LF17488: 79 mm).
Both open their bypass valve in a comparable range: FRAM PH2842 at 12-12 psi, Fleetguard LF17488 at 36.26-36.26 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.