Baldwin BT344-S vs Baldwin BT112: Oil Filter Compatibility
Compare Baldwin BT344-S and Baldwin BT112 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 13/16-16 thread.
Quick verdict
Large bypass PSI mismatch: 12 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin BT344-S and Baldwin BT112 specifications
How matching is scored| Specification | Baldwin BT344-S | Baldwin BT112 |
|---|---|---|
| Thread size | 13/16-16 | 13/16-16 |
| Gasket OD | 71.4 mm | 71.4 mm |
| Gasket ID | 62.7 mm | 62.7 mm |
| Can OD | 94.5 mm | 93.7 mm |
| Height | 113.5 mm | 136.5 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 20 | 8 |
| Anti-drainback valve | No | No |
What matters in this specific comparison
Thread size matches: both are 13/16-16.
Gasket OD is identical at 71.4 mm.
Gasket ID is identical at 62.7 mm.
Baldwin BT112 is 23 mm taller (Baldwin BT344-S: 113.5 mm, Baldwin BT112: 136.5 mm) -- check clearance before substituting.
Can OD differs by 0.8 mm (Baldwin BT344-S: 94.5 mm, Baldwin BT112: 93.7 mm).
Both open their bypass valve in a comparable range: Baldwin BT344-S at 20-20 psi, Baldwin BT112 at 8-8 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.