Baldwin B474 vs LUBER-FINER PH2808: Oil Filter Compatibility
Compare Baldwin B474 and LUBER-FINER PH2808 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B474 and LUBER-FINER PH2808 specifications
How matching is scored| Specification | Baldwin B474 | LUBER-FINER PH2808 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 62.7 mm | 63 mm |
| Gasket ID | 54.8 mm | 52 mm |
| Can OD | 76.2 mm | 74.73 mm |
| Height | 89.7 mm | 81.79 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 12 |
| Anti-drainback valve | No | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 0.3 mm (Baldwin B474: 62.7 mm, LUBER-FINER PH2808: 63 mm).
Gasket ID differs by 2.8 mm (Baldwin B474: 54.8 mm, LUBER-FINER PH2808: 52 mm).
Baldwin B474 is 7.9 mm taller (Baldwin B474: 89.7 mm, LUBER-FINER PH2808: 81.79 mm) -- check clearance before substituting.
Can OD differs by 1.5 mm (Baldwin B474: 76.2 mm, LUBER-FINER PH2808: 74.73 mm).
Both open their bypass valve in a comparable range: Baldwin B474 at 8-8 psi, LUBER-FINER PH2808 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.