Baldwin B474 vs K&N HP-1004: Oil Filter Compatibility
Compare Baldwin B474 and K&N HP-1004 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Candidate adds ADBV
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B474 and K&N HP-1004 specifications
How matching is scored| Specification | Baldwin B474 | K&N HP-1004 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 62.7 mm | 62 mm |
| Gasket ID | 54.8 mm | 54 mm |
| Can OD | 76.2 mm | 80 mm |
| Height | 89.7 mm | 87 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 11 - 17 |
| Anti-drainback valve | No | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 0.7 mm (Baldwin B474: 62.7 mm, K&N HP-1004: 62 mm).
Gasket ID differs by 0.8 mm (Baldwin B474: 54.8 mm, K&N HP-1004: 54 mm).
Baldwin B474 is 2.7 mm taller (Baldwin B474: 89.7 mm, K&N HP-1004: 87 mm) -- check clearance before substituting.
Can OD differs by 3.8 mm (Baldwin B474: 76.2 mm, K&N HP-1004: 80 mm).
Both open their bypass valve in a comparable range: Baldwin B474 at 8-8 psi, K&N HP-1004 at 11-17 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.