WIX WL10255 vs FRAM PH2: Oil Filter Compatibility
Compare WIX WL10255 and FRAM PH2 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M22x1.5 thread.
Quick verdict
Both use a M22x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
WIX WL10255 and FRAM PH2 specifications
How matching is scored| Specification | WIX WL10255 | FRAM PH2 |
|---|---|---|
| Thread size | M22x1.5 | M22X1,5 |
| Gasket OD | 69.62 mm | 71.1 mm |
| Gasket ID | 62.43 mm | 62 mm |
| Can OD | 74.19 mm | 93 mm |
| Height | 113.6 mm | 97 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14 | 14.504 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M22x1.5.
Gasket OD differs by 1.5 mm (WIX WL10255: 69.62 mm, FRAM PH2: 71.1 mm).
Gasket ID differs by 0.4 mm (WIX WL10255: 62.43 mm, FRAM PH2: 62 mm).
WIX WL10255 is 16.6 mm taller (WIX WL10255: 113.6 mm, FRAM PH2: 97 mm) -- check clearance before substituting.
Can OD differs by 18.8 mm (WIX WL10255: 74.19 mm, FRAM PH2: 93 mm).
Both open their bypass valve in a comparable range: WIX WL10255 at 14-14 psi, FRAM PH2 at 14.504-14.504 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.