WIX 51372 vs Bosch 3410: Oil Filter Compatibility
Compare WIX 51372 and Bosch 3410 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee.
Quick verdict
These filters may still be worth comparing, but thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements should be reviewed before substitution.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
WIX 51372 and Bosch 3410 specifications
| Specification | WIX 51372 | Bosch 3410 |
|---|---|---|
| Thread size | M22x1.5 | M22x1.5 |
| Gasket OD | 71.98 mm | 71 mm |
| Gasket ID | 62.53 mm | 62 mm |
| Can OD | 93.17 mm | 92 mm |
| Height | 97.43 mm | 94.74 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 13 - 19 | 8 - 16 |
| Anti-drainback valve | Yes | Yes |
What matters most in this comparison?
Thread match: A direct spin-on substitute starts with the same thread size. If the threads differ, the comparison stops there.
Gasket fit: Even when thread size matches, the gasket outside diameter and inside diameter still control whether the filter seals safely against the mounting surface.
Height difference: Small height differences may be acceptable, but longer filters can create clearance problems in tighter installations.
Valve behavior: Bypass and anti-drainback differences can matter in real-world service, especially on cold start or in applications sensitive to oil drain-back.
Related filter pages
- WIX 51372 oil filter cross reference
- Bosch 3410 oil filter cross reference
- WIX 51372MP oil filter cross reference
- WIX 57899 oil filter cross reference
- WIX WL10454 oil filter cross reference
- Motorcraft FL-820S oil filter cross reference
- FRAM PH2 oil filter cross reference
- FRAM PH4553A oil filter cross reference
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.