Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A vs K&N HP-2010: Oil Filter Compatibility
Compare Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A and K&N HP-2010 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Closest known dimensional difference: height -22.6 mm. Verify application-specific requirements before substituting.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A and K&N HP-2010 specifications
How matching is scored| Specification | Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A | K&N HP-2010 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 63 mm | 63 mm |
| Gasket ID | 52 mm | 52 mm |
| Can OD | 68.33 mm | 93 mm |
| Height | 89.41 mm | 112 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14 - 18 | 11 - 17 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 63 mm.
Gasket ID is identical at 52 mm.
K&N HP-2010 is 22.6 mm taller (Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 89.41 mm, K&N HP-2010: 112 mm) -- check clearance before substituting.
Can OD differs by 24.7 mm (Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 68.33 mm, K&N HP-2010: 93 mm).
Both open their bypass valve in a comparable range: Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A at 14-18 psi, K&N HP-2010 at 11-17 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.