Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A vs FRAM PH5594: Oil Filter Compatibility
Compare Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A and FRAM PH5594 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A and FRAM PH5594 specifications
How matching is scored| Specification | Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A | FRAM PH5594 |
|---|---|---|
| Thread size | M20x1.5 | M20X1,5 |
| Gasket OD | 63 mm | 63 mm |
| Gasket ID | 52 mm | 52 mm |
| Can OD | 68.33 mm | 68 mm |
| Height | 89.41 mm | 85 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14 - 18 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 63 mm.
Gasket ID is identical at 52 mm.
Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A is 4.4 mm taller (Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 89.41 mm, FRAM PH5594: 85 mm) -- check clearance before substituting.
Can OD differs by 0.3 mm (Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 68.33 mm, FRAM PH5594: 68 mm).
Both open their bypass valve in a comparable range: Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A at 14-18 psi, FRAM PH5594 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.