MANN-FILTER W 920/51 vs FRAM PH4560: Oil Filter Compatibility
Compare MANN-FILTER W 920/51 and FRAM PH4560 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
MANN-FILTER W 920/51 and FRAM PH4560 specifications
How matching is scored| Specification | MANN-FILTER W 920/51 | FRAM PH4560 |
|---|---|---|
| Thread size | 3/4-16 | 3/4"-16 |
| Gasket OD | 71.5 mm | 71 mm |
| Gasket ID | 62.5 mm | 61 mm |
| Can OD | 93.19 mm | 95 mm |
| Height | 95.81 mm | 95 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 - 11 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.5 mm (MANN-FILTER W 920/51: 71.5 mm, FRAM PH4560: 71 mm).
Gasket ID differs by 1.5 mm (MANN-FILTER W 920/51: 62.5 mm, FRAM PH4560: 61 mm).
MANN-FILTER W 920/51 is 0.8 mm taller (MANN-FILTER W 920/51: 95.81 mm, FRAM PH4560: 95 mm) -- check clearance before substituting.
Can OD differs by 1.8 mm (MANN-FILTER W 920/51: 93.19 mm, FRAM PH4560: 95 mm).
Both open their bypass valve in a comparable range: MANN-FILTER W 920/51 at 8-11 psi, FRAM PH4560 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.