MANN-FILTER W 719/45 vs FRAM PH10600: Oil Filter Compatibility
Compare MANN-FILTER W 719/45 and FRAM PH10600 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M27x1.5 thread.
Quick verdict
Both use a M27x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
MANN-FILTER W 719/45 and FRAM PH10600 specifications
How matching is scored| Specification | MANN-FILTER W 719/45 | FRAM PH10600 |
|---|---|---|
| Thread size | M27x1.5 | M27X1,5 |
| Gasket OD | 71.5 mm | 71 mm |
| Gasket ID | 62.5 mm | 62 mm |
| Can OD | 77.79 mm | 78 mm |
| Height | 142.88 mm | 145 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 36 | 36.259 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M27x1.5.
Gasket OD differs by 0.5 mm (MANN-FILTER W 719/45: 71.5 mm, FRAM PH10600: 71 mm).
Gasket ID differs by 0.5 mm (MANN-FILTER W 719/45: 62.5 mm, FRAM PH10600: 62 mm).
FRAM PH10600 is 2.1 mm taller (MANN-FILTER W 719/45: 142.88 mm, FRAM PH10600: 145 mm) -- check clearance before substituting.
Can OD differs by 0.2 mm (MANN-FILTER W 719/45: 77.79 mm, FRAM PH10600: 78 mm).
Both open their bypass valve in a comparable range: MANN-FILTER W 719/45 at 36-36 psi, FRAM PH10600 at 36.259-36.259 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.