MAHLE OC 41 vs WIX 57251: Oil Filter Compatibility
Compare MAHLE OC 41 and WIX 57251 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 1-12 thread.
Quick verdict
Large bypass PSI mismatch: 20 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
MAHLE OC 41 and WIX 57251 specifications
How matching is scored| Specification | MAHLE OC 41 | WIX 57251 |
|---|---|---|
| Thread size | 1-12 | 1-12 |
| Gasket OD | 72 mm | 72.01 mm |
| Gasket ID | 62 mm | 61.85 mm |
| Can OD | 93.47 mm | 93.73 mm |
| Height | 210.57 mm | 206.5 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 30 | 50 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 1-12.
Gasket OD is identical at 72 mm.
Gasket ID differs by 0.1 mm (MAHLE OC 41: 62 mm, WIX 57251: 61.85 mm).
MAHLE OC 41 is 4.1 mm taller (MAHLE OC 41: 210.57 mm, WIX 57251: 206.5 mm) -- check clearance before substituting.
Can OD differs by 0.3 mm (MAHLE OC 41: 93.47 mm, WIX 57251: 93.73 mm).
Both open their bypass valve in a comparable range: MAHLE OC 41 at 30-30 psi, WIX 57251 at 50-50 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.