LUBER-FINER PH400 vs Fleetguard LF3549: Oil Filter Compatibility
Compare LUBER-FINER PH400 and Fleetguard LF3549 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Large bypass PSI mismatch: 7.9 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
LUBER-FINER PH400 and Fleetguard LF3549 specifications
How matching is scored| Specification | LUBER-FINER PH400 | Fleetguard LF3549 |
|---|---|---|
| Thread size | 3/4-16UNF | 3/4-16 UNF-2B |
| Gasket OD | 72 mm | 71.98 mm |
| Gasket ID | 62 mm | 62.53 mm |
| Can OD | 75.69 mm | 78 mm |
| Height | 105.16 mm | 116 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 - 11 | 17.41 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD is identical at 72 mm.
Gasket ID differs by 0.5 mm (LUBER-FINER PH400: 62 mm, Fleetguard LF3549: 62.53 mm).
Fleetguard LF3549 is 10.8 mm taller (LUBER-FINER PH400: 105.16 mm, Fleetguard LF3549: 116 mm) -- check clearance before substituting.
Can OD differs by 2.3 mm (LUBER-FINER PH400: 75.69 mm, Fleetguard LF3549: 78 mm).
Both open their bypass valve in a comparable range: LUBER-FINER PH400 at 8-11 psi, Fleetguard LF3549 at 17.41-17.41 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.