LUBER-FINER HP1 vs Fleetguard LF701: Oil Filter Compatibility
Compare LUBER-FINER HP1 and Fleetguard LF701 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Large bypass PSI mismatch: 11 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
LUBER-FINER HP1 and Fleetguard LF701 specifications
How matching is scored| Specification | LUBER-FINER HP1 | Fleetguard LF701 |
|---|---|---|
| Thread size | 3/4-16UNF | 3/4-16 UNF-2B |
| Gasket OD | 70 mm | 71.88 mm |
| Gasket ID | 61 mm | 62.48 mm |
| Can OD | 93 mm | 94 mm |
| Height | 146.05 mm | 146 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 22 | 11.02 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 1.9 mm (LUBER-FINER HP1: 70 mm, Fleetguard LF701: 71.88 mm).
Gasket ID differs by 1.5 mm (LUBER-FINER HP1: 61 mm, Fleetguard LF701: 62.48 mm).
LUBER-FINER HP1 is 0.1 mm taller (LUBER-FINER HP1: 146.05 mm, Fleetguard LF701: 146 mm) -- check clearance before substituting.
Can OD differs by 1 mm (LUBER-FINER HP1: 93 mm, Fleetguard LF701: 94 mm).
Both open their bypass valve in a comparable range: LUBER-FINER HP1 at 22-22 psi, Fleetguard LF701 at 11.02-11.02 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.