K&N HP-2011 vs WIX WL10414: Oil Filter Compatibility
Compare K&N HP-2011 and WIX WL10414 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
K&N HP-2011 and WIX WL10414 specifications
How matching is scored| Specification | K&N HP-2011 | WIX WL10414 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 72 mm | 69.44 mm |
| Gasket ID | 62 mm | 61.72 mm |
| Can OD | 93 mm | 74.2 mm |
| Height | 112 mm | 105 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 11 - 17 | 14 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 2.6 mm (K&N HP-2011: 72 mm, WIX WL10414: 69.44 mm).
Gasket ID differs by 0.3 mm (K&N HP-2011: 62 mm, WIX WL10414: 61.72 mm).
K&N HP-2011 is 7 mm taller (K&N HP-2011: 112 mm, WIX WL10414: 105 mm) -- check clearance before substituting.
Can OD differs by 18.8 mm (K&N HP-2011: 93 mm, WIX WL10414: 74.2 mm).
Both open their bypass valve in a comparable range: K&N HP-2011 at 11-17 psi, WIX WL10414 at 14-14 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.