K&N HP-2011 vs NAPA Gold 1580: Oil Filter Compatibility
Compare K&N HP-2011 and NAPA Gold 1580 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
K&N HP-2011 and NAPA Gold 1580 specifications
How matching is scored| Specification | K&N HP-2011 | NAPA Gold 1580 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 72 mm | 72 mm |
| Gasket ID | 62 mm | 63 mm |
| Can OD | 93 mm | 93.04 mm |
| Height | 112 mm | 96.82 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 11 - 17 | 8 - 11 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 72 mm.
Gasket ID differs by 1 mm (K&N HP-2011: 62 mm, NAPA Gold 1580: 63 mm).
K&N HP-2011 is 15.2 mm taller (K&N HP-2011: 112 mm, NAPA Gold 1580: 96.82 mm) -- check clearance before substituting.
Can OD is identical at 93 mm.
Both open their bypass valve in a comparable range: K&N HP-2011 at 11-17 psi, NAPA Gold 1580 at 8-11 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.