K&N HP-1004 vs FRAM PH6811: Oil Filter Compatibility
Compare K&N HP-1004 and FRAM PH6811 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
K&N HP-1004 and FRAM PH6811 specifications
How matching is scored| Specification | K&N HP-1004 | FRAM PH6811 |
|---|---|---|
| Thread size | M20x1.5 | M20X1,5 |
| Gasket OD | 62 mm | 63 mm |
| Gasket ID | 54 mm | 57 mm |
| Can OD | 80 mm | 66 mm |
| Height | 87 mm | 90 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 11 - 17 | 14.504 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 1 mm (K&N HP-1004: 62 mm, FRAM PH6811: 63 mm).
Gasket ID differs by 3 mm (K&N HP-1004: 54 mm, FRAM PH6811: 57 mm).
FRAM PH6811 is 3 mm taller (K&N HP-1004: 87 mm, FRAM PH6811: 90 mm) -- check clearance before substituting.
Can OD differs by 14 mm (K&N HP-1004: 80 mm, FRAM PH6811: 66 mm).
Both open their bypass valve in a comparable range: K&N HP-1004 at 11-17 psi, FRAM PH6811 at 14.504-14.504 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.