FRAM PH9105 vs WIX WL10063: Oil Filter Compatibility
Compare FRAM PH9105 and WIX WL10063 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Large bypass PSI mismatch: 24 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH9105 and WIX WL10063 specifications
How matching is scored| Specification | FRAM PH9105 | WIX WL10063 |
|---|---|---|
| Thread size | 3/4-16 | 3/4-16 |
| Gasket OD | 71.1 mm | 72.54 mm |
| Gasket ID | 62.5 mm | 63.02 mm |
| Can OD | 93 mm | 95.99 mm |
| Height | 210 mm | 211.1 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 36 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 1.4 mm (FRAM PH9105: 71.1 mm, WIX WL10063: 72.54 mm).
Gasket ID differs by 0.5 mm (FRAM PH9105: 62.5 mm, WIX WL10063: 63.02 mm).
WIX WL10063 is 1.1 mm taller (FRAM PH9105: 210 mm, WIX WL10063: 211.1 mm) -- check clearance before substituting.
Can OD differs by 3 mm (FRAM PH9105: 93 mm, WIX WL10063: 95.99 mm).
Both open their bypass valve in a comparable range: FRAM PH9105 at 12-12 psi, WIX WL10063 at 36-36 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.