FRAM PH6607 vs Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: Oil Filter Compatibility
Compare FRAM PH6607 and Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH6607 and Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A specifications
How matching is scored| Specification | FRAM PH6607 | Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A |
|---|---|---|
| Thread size | M20X1,5 | M20x1.5 |
| Gasket OD | 62.5 mm | 63 mm |
| Gasket ID | 55 mm | 52 mm |
| Can OD | 68 mm | 68.33 mm |
| Height | 67 mm | 89.41 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14.504 | 14 - 18 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 0.5 mm (FRAM PH6607: 62.5 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 63 mm).
Gasket ID differs by 3 mm (FRAM PH6607: 55 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 52 mm).
Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A is 22.4 mm taller (FRAM PH6607: 67 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 89.41 mm) -- check clearance before substituting.
Can OD differs by 0.3 mm (FRAM PH6607: 68 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A: 68.33 mm).
Both open their bypass valve in a comparable range: FRAM PH6607 at 14.504-14.504 psi, Mobil 1 (ExxonMobil / Mann+Hummel) M1-110A at 14-18 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.