FRAM PH5949 vs Kubota HH150-32094: Oil Filter Compatibility
Compare FRAM PH5949 and Kubota HH150-32094 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH5949 and Kubota HH150-32094 specifications
How matching is scored| Specification | FRAM PH5949 | Kubota HH150-32094 |
|---|---|---|
| Thread size | M20X1,5 | M20x1.5 |
| Gasket OD | 62.5 mm | 63 mm |
| Gasket ID | 54.4 mm | 54 mm |
| Can OD | 68 mm | 81 mm |
| Height | 74 mm | 86 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 14 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 0.5 mm (FRAM PH5949: 62.5 mm, Kubota HH150-32094: 63 mm).
Gasket ID differs by 0.4 mm (FRAM PH5949: 54.4 mm, Kubota HH150-32094: 54 mm).
Kubota HH150-32094 is 12 mm taller (FRAM PH5949: 74 mm, Kubota HH150-32094: 86 mm) -- check clearance before substituting.
Can OD differs by 13 mm (FRAM PH5949: 68 mm, Kubota HH150-32094: 81 mm).
Both open their bypass valve in a comparable range: FRAM PH5949 at 12-12 psi, Kubota HH150-32094 at 14-14 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.