FRAM PH4558 vs MAHLE OC 614: Oil Filter Compatibility
Compare FRAM PH4558 and MAHLE OC 614 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH4558 and MAHLE OC 614 specifications
How matching is scored| Specification | FRAM PH4558 | MAHLE OC 614 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 71 mm | 71 mm |
| Gasket ID | 61 mm | 62 mm |
| Can OD | 76 mm | 74.7 mm |
| Height | 85 mm | 79 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 12 - 15 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 71 mm.
Gasket ID differs by 1 mm (FRAM PH4558: 61 mm, MAHLE OC 614: 62 mm).
FRAM PH4558 is 6 mm taller (FRAM PH4558: 85 mm, MAHLE OC 614: 79 mm) -- check clearance before substituting.
Can OD differs by 1.3 mm (FRAM PH4558: 76 mm, MAHLE OC 614: 74.7 mm).
Both open their bypass valve in a comparable range: FRAM PH4558 at 12-12 psi, MAHLE OC 614 at 12-15 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.