FRAM PH4546 vs WIX 51182: Oil Filter Compatibility
Compare FRAM PH4546 and WIX 51182 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee.
Quick verdict
These filters may still be worth comparing, but thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements should be reviewed before substitution.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH4546 and WIX 51182 specifications
| Specification | FRAM PH4546 | WIX 51182 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 72 mm | 71.98 mm |
| Gasket ID | 62 mm | 62.53 mm |
| Can OD | 93 mm | 92.96 mm |
| Height | 143 mm | 132.3 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 13 - 19 |
| Anti-drainback valve | Yes | Yes |
What matters most in this comparison?
Thread match: A direct spin-on substitute starts with the same thread size. If the threads differ, the comparison stops there.
Gasket fit: Even when thread size matches, the gasket outside diameter and inside diameter still control whether the filter seals safely against the mounting surface.
Height difference: Small height differences may be acceptable, but longer filters can create clearance problems in tighter installations.
Valve behavior: Bypass and anti-drainback differences can matter in real-world service, especially on cold start or in applications sensitive to oil drain-back.
Related filter pages
- FRAM PH4546 oil filter cross reference
- WIX 51182 oil filter cross reference
- FRAM PH5754 oil filter cross reference
- Donaldson P550934 oil filter cross reference
- WIX 57731 oil filter cross reference
- NAPA Gold 1130 oil filter cross reference
- Fleetguard LF3647 oil filter cross reference
- K&N HP-2011 oil filter cross reference
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.