FRAM PH43 vs MANN-FILTER W 930/13: Oil Filter Compatibility
Compare FRAM PH43 and MANN-FILTER W 930/13 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH43 and MANN-FILTER W 930/13 specifications
How matching is scored| Specification | FRAM PH43 | MANN-FILTER W 930/13 |
|---|---|---|
| Thread size | 3/4-16 | 3/4-16 |
| Gasket OD | 71.1 mm | 71.5 mm |
| Gasket ID | 62.5 mm | 62.5 mm |
| Can OD | 93.7 mm | 93.47 mm |
| Height | 111.1 mm | 110.19 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 8 - 11 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.4 mm (FRAM PH43: 71.1 mm, MANN-FILTER W 930/13: 71.5 mm).
Gasket ID is identical at 62.5 mm.
FRAM PH43 is 0.9 mm taller (FRAM PH43: 111.1 mm, MANN-FILTER W 930/13: 110.19 mm) -- check clearance before substituting.
Can OD differs by 0.2 mm (FRAM PH43: 93.7 mm, MANN-FILTER W 930/13: 93.47 mm).
Both open their bypass valve in a comparable range: FRAM PH43 at 12-12 psi, MANN-FILTER W 930/13 at 8-11 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.