FRAM PH2824 vs MAHLE OC 34: Oil Filter Compatibility
Compare FRAM PH2824 and MAHLE OC 34 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH2824 and MAHLE OC 34 specifications
How matching is scored| Specification | FRAM PH2824 | MAHLE OC 34 |
|---|---|---|
| Thread size | 3/4"-16 | 3/4-16 |
| Gasket OD | 72 mm | 71.5 mm |
| Gasket ID | 62 mm | 62.5 mm |
| Can OD | 107.95 mm | 77.47 mm |
| Height | 185.67 mm | 149.86 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 | 14 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.5 mm (FRAM PH2824: 72 mm, MAHLE OC 34: 71.5 mm).
Gasket ID differs by 0.5 mm (FRAM PH2824: 62 mm, MAHLE OC 34: 62.5 mm).
FRAM PH2824 is 35.8 mm taller (FRAM PH2824: 185.67 mm, MAHLE OC 34: 149.86 mm) -- check clearance before substituting.
Can OD differs by 30.5 mm (FRAM PH2824: 107.95 mm, MAHLE OC 34: 77.47 mm).
Both open their bypass valve in a comparable range: FRAM PH2824 at 12-12 psi, MAHLE OC 34 at 14-14 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.