FRAM PH2 vs Baldwin B156: Oil Filter Compatibility
Compare FRAM PH2 and Baldwin B156 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M22x1.5 thread.
Quick verdict
Closest known dimensional difference: height +14.4 mm. Verify application-specific requirements before substituting.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH2 and Baldwin B156 specifications
How matching is scored| Specification | FRAM PH2 | Baldwin B156 |
|---|---|---|
| Thread size | M22X1,5 | M22x1.5 |
| Gasket OD | 71.1 mm | 72 mm |
| Gasket ID | 62 mm | 62 mm |
| Can OD | 93 mm | 93.7 mm |
| Height | 97 mm | 82.6 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 14.504 | 20 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M22x1.5.
Gasket OD differs by 0.9 mm (FRAM PH2: 71.1 mm, Baldwin B156: 72 mm).
Gasket ID is identical at 62 mm.
FRAM PH2 is 14.4 mm taller (FRAM PH2: 97 mm, Baldwin B156: 82.6 mm) -- check clearance before substituting.
Can OD differs by 0.7 mm (FRAM PH2: 93 mm, Baldwin B156: 93.7 mm).
Both open their bypass valve in a comparable range: FRAM PH2 at 14.504-14.504 psi, Baldwin B156 at 20-20 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.