FRAM PH10600 vs MANN-FILTER W 719/45: Oil Filter Compatibility
Compare FRAM PH10600 and MANN-FILTER W 719/45 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M27x1.5 thread.
Quick verdict
Both use a M27x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM PH10600 and MANN-FILTER W 719/45 specifications
How matching is scored| Specification | FRAM PH10600 | MANN-FILTER W 719/45 |
|---|---|---|
| Thread size | M27X1,5 | M27x1.5 |
| Gasket OD | 71 mm | 71.5 mm |
| Gasket ID | 62 mm | 62.5 mm |
| Can OD | 78 mm | 77.79 mm |
| Height | 145 mm | 142.88 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 36.259 | 36 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M27x1.5.
Gasket OD differs by 0.5 mm (FRAM PH10600: 71 mm, MANN-FILTER W 719/45: 71.5 mm).
Gasket ID differs by 0.5 mm (FRAM PH10600: 62 mm, MANN-FILTER W 719/45: 62.5 mm).
FRAM PH10600 is 2.1 mm taller (FRAM PH10600: 145 mm, MANN-FILTER W 719/45: 142.88 mm) -- check clearance before substituting.
Can OD differs by 0.2 mm (FRAM PH10600: 78 mm, MANN-FILTER W 719/45: 77.79 mm).
Both open their bypass valve in a comparable range: FRAM PH10600 at 36.259-36.259 psi, MANN-FILTER W 719/45 at 36-36 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.