FRAM HP4 vs Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A: Oil Filter Compatibility
Compare FRAM HP4 and Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 13/16-16 thread.
Quick verdict
Large bypass PSI mismatch: 8.5 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
FRAM HP4 and Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A specifications
How matching is scored| Specification | FRAM HP4 | Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A |
|---|---|---|
| Thread size | 13/16-16 | 13/16-16 |
| Gasket OD | 71 mm | 72 mm |
| Gasket ID | 62 mm | 62 mm |
| Can OD | 95 mm | 93.73 mm |
| Height | 111 mm | 86.36 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 22 | 12 - 15 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 13/16-16.
Gasket OD differs by 1 mm (FRAM HP4: 71 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A: 72 mm).
Gasket ID is identical at 62 mm.
FRAM HP4 is 24.6 mm taller (FRAM HP4: 111 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A: 86.36 mm) -- check clearance before substituting.
Can OD differs by 1.3 mm (FRAM HP4: 95 mm, Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A: 93.73 mm).
Both open their bypass valve in a comparable range: FRAM HP4 at 22-22 psi, Mobil 1 (ExxonMobil / Mann+Hummel) M1-107A at 12-15 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.