Fleetguard LF701 vs Fleetguard LF3933: Oil Filter Compatibility
Compare Fleetguard LF701 and Fleetguard LF3933 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Fleetguard LF701 and Fleetguard LF3933 specifications
How matching is scored| Specification | Fleetguard LF701 | Fleetguard LF3933 |
|---|---|---|
| Thread size | 3/4-16 UNF-2B | 3/4-16 UNF-2B |
| Gasket OD | 71.88 mm | 71.98 mm |
| Gasket ID | 62.48 mm | 62.54 mm |
| Can OD | 94 mm | 94 mm |
| Height | 146 mm | 99 mm |
| Internal bypass valve | Yes | Unknown |
| Bypass PSID | 11.02 | Unknown |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.1 mm (Fleetguard LF701: 71.88 mm, Fleetguard LF3933: 71.98 mm).
Gasket ID differs by 0.1 mm (Fleetguard LF701: 62.48 mm, Fleetguard LF3933: 62.54 mm).
Fleetguard LF701 is 47 mm taller (Fleetguard LF701: 146 mm, Fleetguard LF3933: 99 mm) -- check clearance before substituting.
Can OD is identical at 94 mm.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.