Fleetguard LF697 vs FRAM PH16: Oil Filter Compatibility
Compare Fleetguard LF697 and FRAM PH16 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Fleetguard LF697 and FRAM PH16 specifications
How matching is scored| Specification | Fleetguard LF697 | FRAM PH16 |
|---|---|---|
| Thread size | 3/4-16 UNF-2B | 3/4-16 |
| Gasket OD | 71.88 mm | 71.04 mm |
| Gasket ID | 62.48 mm | 61.47 mm |
| Can OD | 96 mm | 92.86 mm |
| Height | 137 mm | 93.68 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 9.57 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 0.8 mm (Fleetguard LF697: 71.88 mm, FRAM PH16: 71.04 mm).
Gasket ID differs by 1 mm (Fleetguard LF697: 62.48 mm, FRAM PH16: 61.47 mm).
Fleetguard LF697 is 43.3 mm taller (Fleetguard LF697: 137 mm, FRAM PH16: 93.68 mm) -- check clearance before substituting.
Can OD differs by 3.1 mm (Fleetguard LF697: 96 mm, FRAM PH16: 92.86 mm).
Both open their bypass valve in a comparable range: Fleetguard LF697 at 9.57-9.57 psi, FRAM PH16 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.