Fleetguard LF4016 vs Fleetguard LF655: Oil Filter Compatibility
Compare Fleetguard LF4016 and Fleetguard LF655 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Fleetguard LF4016 and Fleetguard LF655 specifications
How matching is scored| Specification | Fleetguard LF4016 | Fleetguard LF655 |
|---|---|---|
| Thread size | 3/4-16 UNF-2B | 3/4-16 UNF-2B |
| Gasket OD | 70 mm | 71.98 mm |
| Gasket ID | 62 mm | 62.53 mm |
| Can OD | 94 mm | 78 mm |
| Height | 116 mm | 116 mm |
| Internal bypass valve | Unknown | No |
| Bypass PSID | 17.4 | Not applicable |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 2 mm (Fleetguard LF4016: 70 mm, Fleetguard LF655: 71.98 mm).
Gasket ID differs by 0.5 mm (Fleetguard LF4016: 62 mm, Fleetguard LF655: 62.53 mm).
Height is identical at 116 mm.
Can OD differs by 16 mm (Fleetguard LF4016: 94 mm, Fleetguard LF655: 78 mm).
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.