Fleetguard LF3918 vs WIX 57143: Oil Filter Compatibility
Compare Fleetguard LF3918 and WIX 57143 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee.
Quick verdict
Candidate adds internal bypass; usually redundant with engine-mounted bypass · Candidate adds ADBV
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Fleetguard LF3918 and WIX 57143 specifications
How matching is scored| Specification | Fleetguard LF3918 | WIX 57143 |
|---|---|---|
| Thread size | M18x1.5 | M18x1.5 |
| Gasket OD | 70.1 mm | 71.98 mm |
| Gasket ID | 62.5 mm | 61.98 mm |
| Can OD | 93 mm | 77.88 mm |
| Height | 176 mm | 78.94 mm |
| Internal bypass valve | No | Yes |
| Bypass PSID | Not applicable | 12 - 15 |
| Anti-drainback valve | No | Yes |
What matters most in this comparison?
Thread match: A direct spin-on substitute starts with the same thread size. If the threads differ, the comparison stops there.
Gasket fit: Even when thread size matches, the gasket outside diameter and inside diameter still control whether the filter seals safely against the mounting surface.
Height difference: Small height differences may be acceptable, but longer filters can create clearance problems in tighter installations.
Valve behavior: Bypass and anti-drainback differences can matter in real-world service, especially on cold start or in applications sensitive to oil drain-back.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.