Fleetguard LF3489 vs LUBER-FINER HP1: Oil Filter Compatibility
Compare Fleetguard LF3489 and LUBER-FINER HP1 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Bypass presence unknown on one or both filters
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Fleetguard LF3489 and LUBER-FINER HP1 specifications
How matching is scored| Specification | Fleetguard LF3489 | LUBER-FINER HP1 |
|---|---|---|
| Thread size | 3/4-16 UNF-2B | 3/4-16UNF |
| Gasket OD | 70 mm | 70 mm |
| Gasket ID | 62 mm | 61 mm |
| Can OD | 108 mm | 93 mm |
| Height | 145 mm | 146.05 mm |
| Internal bypass valve | Unknown | Yes |
| Bypass PSID | 23.21 | 22 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD is identical at 70 mm.
Gasket ID differs by 1 mm (Fleetguard LF3489: 62 mm, LUBER-FINER HP1: 61 mm).
LUBER-FINER HP1 is 1.1 mm taller (Fleetguard LF3489: 145 mm, LUBER-FINER HP1: 146.05 mm) -- check clearance before substituting.
Can OD differs by 15 mm (Fleetguard LF3489: 108 mm, LUBER-FINER HP1: 93 mm).
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.