Donaldson P550008 vs FRAM PH46: Oil Filter Compatibility
Compare Donaldson P550008 and FRAM PH46 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Donaldson P550008 and FRAM PH46 specifications
How matching is scored| Specification | Donaldson P550008 | FRAM PH46 |
|---|---|---|
| Thread size | 3/4-16 | 3/4-16 |
| Gasket OD | 72.4 mm | 71.1 mm |
| Gasket ID | 62 mm | 62.5 mm |
| Can OD | 93 mm | 93.7 mm |
| Height | 136 mm | 137.4 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 12 - 15 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 1.3 mm (Donaldson P550008: 72.4 mm, FRAM PH46: 71.1 mm).
Gasket ID differs by 0.5 mm (Donaldson P550008: 62 mm, FRAM PH46: 62.5 mm).
FRAM PH46 is 1.4 mm taller (Donaldson P550008: 136 mm, FRAM PH46: 137.4 mm) -- check clearance before substituting.
Can OD differs by 0.7 mm (Donaldson P550008: 93 mm, FRAM PH46: 93.7 mm).
Both open their bypass valve in a comparable range: Donaldson P550008 at 12-15 psi, FRAM PH46 at 12-12 psi.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.