Baldwin BT364 vs MAHLE OC 54: Oil Filter Compatibility
Compare Baldwin BT364 and MAHLE OC 54 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 1-12 thread.
Quick verdict
Large bypass PSI mismatch: 16 psi · Candidate adds ADBV
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin BT364 and MAHLE OC 54 specifications
How matching is scored| Specification | Baldwin BT364 | MAHLE OC 54 |
|---|---|---|
| Thread size | 1-12 | 1-12 |
| Gasket OD | 71.4 mm | 72 mm |
| Gasket ID | 62.7 mm | 62 mm |
| Can OD | 93.7 mm | 93.4 mm |
| Height | 136.5 mm | 137 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 20 | 36 |
| Anti-drainback valve | No | Yes |
What matters in this specific comparison
Thread size matches: both are 1-12.
Gasket OD differs by 0.6 mm (Baldwin BT364: 71.4 mm, MAHLE OC 54: 72 mm).
Gasket ID differs by 0.7 mm (Baldwin BT364: 62.7 mm, MAHLE OC 54: 62 mm).
MAHLE OC 54 is 0.5 mm taller (Baldwin BT364: 136.5 mm, MAHLE OC 54: 137 mm) -- check clearance before substituting.
Can OD differs by 0.3 mm (Baldwin BT364: 93.7 mm, MAHLE OC 54: 93.4 mm).
Both open their bypass valve in a comparable range: Baldwin BT364 at 20-20 psi, MAHLE OC 54 at 36-36 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.