Baldwin BT223 vs FRAM PH4560: Oil Filter Compatibility
Compare Baldwin BT223 and FRAM PH4560 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a 3/4-16 thread.
Quick verdict
Both use a 3/4-16 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin BT223 and FRAM PH4560 specifications
How matching is scored| Specification | Baldwin BT223 | FRAM PH4560 |
|---|---|---|
| Thread size | 3/4-16 | 3/4"-16 |
| Gasket OD | 69.9 mm | 71 mm |
| Gasket ID | 60.9 mm | 61 mm |
| Can OD | 73.8 mm | 95 mm |
| Height | 88.9 mm | 95 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are 3/4-16.
Gasket OD differs by 1.1 mm (Baldwin BT223: 69.9 mm, FRAM PH4560: 71 mm).
Gasket ID differs by 0.1 mm (Baldwin BT223: 60.9 mm, FRAM PH4560: 61 mm).
FRAM PH4560 is 6.1 mm taller (Baldwin BT223: 88.9 mm, FRAM PH4560: 95 mm) -- check clearance before substituting.
Can OD differs by 21.2 mm (Baldwin BT223: 73.8 mm, FRAM PH4560: 95 mm).
Both open their bypass valve in a comparable range: Baldwin BT223 at 8-8 psi, FRAM PH4560 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.