Baldwin B307 vs FRAM PH5831: Oil Filter Compatibility
Compare Baldwin B307 and FRAM PH5831 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B307 and FRAM PH5831 specifications
How matching is scored| Specification | Baldwin B307 | FRAM PH5831 |
|---|---|---|
| Thread size | M20x1.5 | M20X1,5 |
| Gasket OD | 69.9 mm | 72 mm |
| Gasket ID | 60.9 mm | 62 mm |
| Can OD | 76.2 mm | 76 mm |
| Height | 73 mm | 90 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 12 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 2.1 mm (Baldwin B307: 69.9 mm, FRAM PH5831: 72 mm).
Gasket ID differs by 1.1 mm (Baldwin B307: 60.9 mm, FRAM PH5831: 62 mm).
FRAM PH5831 is 17 mm taller (Baldwin B307: 73 mm, FRAM PH5831: 90 mm) -- check clearance before substituting.
Can OD differs by 0.2 mm (Baldwin B307: 76.2 mm, FRAM PH5831: 76 mm).
Both open their bypass valve in a comparable range: Baldwin B307 at 8-8 psi, FRAM PH5831 at 12-12 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.