Baldwin B247 vs Baldwin B1435: Oil Filter Compatibility
Compare Baldwin B247 and Baldwin B1435 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Large bypass PSI mismatch: 12 psi
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B247 and Baldwin B1435 specifications
How matching is scored| Specification | Baldwin B247 | Baldwin B1435 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 64 mm | 62.7 mm |
| Gasket ID | 54.1 mm | 54.8 mm |
| Can OD | 76.2 mm | 76.2 mm |
| Height | 122.2 mm | 123 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 20 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD differs by 1.3 mm (Baldwin B247: 64 mm, Baldwin B1435: 62.7 mm).
Gasket ID differs by 0.7 mm (Baldwin B247: 54.1 mm, Baldwin B1435: 54.8 mm).
Baldwin B1435 is 0.8 mm taller (Baldwin B247: 122.2 mm, Baldwin B1435: 123 mm) -- check clearance before substituting.
Can OD is identical at 76.2 mm.
Both open their bypass valve in a comparable range: Baldwin B247 at 8-8 psi, Baldwin B1435 at 20-20 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.