Baldwin B247 vs Baldwin B1425: Oil Filter Compatibility
Compare Baldwin B247 and Baldwin B1425 oil filters by compatibility, dimensions, thread size, gasket fit, bypass valve, anti-drainback valve status, and match confidence. Use this comparison as a fitment review, not as an automatic substitution guarantee. Both use a M20x1.5 thread.
Quick verdict
Both use a M20x1.5 thread.
- Thread size is the first hard-fit check for any comparison of spin-on filters.
- Gasket OD and gasket ID are the most important seal-related dimensions.
- Height differences can matter for clearance even when thread and gasket fit appear close.
- Bypass and anti-drainback differences may be important, depending on the application.
Baldwin B247 and Baldwin B1425 specifications
How matching is scored| Specification | Baldwin B247 | Baldwin B1425 |
|---|---|---|
| Thread size | M20x1.5 | M20x1.5 |
| Gasket OD | 64 mm | 64 mm |
| Gasket ID | 54.1 mm | 54.1 mm |
| Can OD | 76.2 mm | 77 mm |
| Height | 122.2 mm | 87.3 mm |
| Internal bypass valve | Yes | Yes |
| Bypass PSID | 8 | 20 |
| Anti-drainback valve | Yes | Yes |
What matters in this specific comparison
Thread size matches: both are M20x1.5.
Gasket OD is identical at 64 mm.
Gasket ID is identical at 54.1 mm.
Baldwin B247 is 34.9 mm taller (Baldwin B247: 122.2 mm, Baldwin B1425: 87.3 mm) -- check clearance before substituting.
Can OD differs by 0.8 mm (Baldwin B247: 76.2 mm, Baldwin B1425: 77 mm).
Both open their bypass valve in a comparable range: Baldwin B247 at 8-8 psi, Baldwin B1425 at 20-20 psi -- these ranges do not overlap.
Open related filters
Before substituting, verify thread fit, gasket sealing dimensions, height clearance, bypass behavior, and anti-drainback requirements for your specific application.